Axis 802.11b Wireless Access Point/Device Point Installation Manual Download Page 1

Stop pinging the Camera Server by typing “Ctrl-C”. 

Accessing the Camera server from a Web browser

1. Start your web browser (e.g. Internet Explorer or Netscape) and enter 
    the IP address of the Camera Server in the location/address field.
2. The Camera Server’s settings can be configured from its internal 
    web page. For more information about configuration, please consult 
    the Camera Servers manual.

Important!

By default the administrator’s user name and password for the Camera 
Server are set to root and pass, respectively. 

4

Should you require any technical assistance, please contact your 
Axis reseller. If your questions cannot be answered immediately, 
your reseller will forward your queries through the appropriate 
channels to ensure a rapid response.

If you are connected to the Internet, you can:

   

Download user documentation and firmware updates

   

Find answers to previously resolved problems in the FAQ data

      base. Search by product, category or phrases

   

Report problems to Axis support staff by logging in 

     to your private support area

Visit the Axis Support Web at www.axis.com/techsup/

www.axis.com

©2003, Axis Communications AB. Axis and the Axis logo are registered trademarks 
of Axis Communications AB. All other company names and products are trade-
marks or registered trademarks of their respective companies. We reserve the 
right to introduce modifications without notice.

Axis Communications Technical Support

802.11b Wireless Access Point/Device Point* 

 

System Installation Guide

*The Device Point is commonly referred to as the Station Adapter.

1986

1/EN/RI/030

2

AVERTISSEMENT AUX UTILISATEURS

La décision N° 01-480 en date du 23 mai 

2001 prise par l’Autorité de Régulation des 

Télécommunications (ART) autorise l’utilisation 

d’une partie de la bande de fréquences 

2400-2483,5 MHz pour les réseaux locaux 

radioéléctriques (RLAN) en France.

Cependant au niveau national, seule la bande 

2446,5-2483,5 MHz est autorisée pour des 

produits ayant une puissance limitée à 100 mW

Cette bande de fréquences correspond aux 

canaux 10,11,12 et 13.

En installant et utilisant ce produit réseaux 

sans fils pour RLAN, vous vous engagez donc 

à respecter cette réglementation et à n’utiliser 
que ces 4 canaux.

WARNING

Decision No. 01-480 of the Autorité de 

Régulation de Télécommunications (ART), 

dated 23 May 2001, authorizes the utilization 

of a part of the 2400-2483.5Mhz radio 

band for Radio Local Area Networks (RLAN) 

in France. However, this product is strictly 

authorized for limited use on channels 10, 11, 

12 and 13 of the 2446.5-2483.5MHz radio 

band only. As failure to comply with these 

regulations may be considered a punishable 

offence, you are subsequently reminded to 

strictly adhere to these regulations when 

installing and using this product in France. 

*Attention! Veuillez lire la notice d’installation 
 (au verso) avant de procéder à l’installation

*Important! please read the installation 
 notices (overleaf) prior to installation

Reviews: