Camera Housing
This document is an addendum to the
Camera
Housing & Accessories Operating Instructions
and
describes how to connect power to the AXIS 221
installed in the outdoor housing. Please read
through both instructions carefully before
proceeding with the installation.
Camera housing with AXIS 221 installed
Follow the instructions in the
Camera Housing &
Accessories Operating Instructions
to install the
Axis network camera.
Follow these instructions to connect power to the
camera:
Connect the supplied cable from the power connector
in the camera housing (1,3) to the connector on the
back of the camera (2,4).
No.
Color
Description
1
Black
Power connector GND (-)
2
Black
Camera GND (-)
3
Red
Power connector DC Power (+)
4
Red
Camera DC Power (+)
2
4
3
1
4
2
This description applies to the following articles:
Important!
Make sure that the + and - wires are connected correctly. If not,
the camera may be damaged when power is applied.
Item
Part no.
VT Power Supply OHEPS19
0217-011
VT Verso Housing HPV42K1A000
0217-001
AXIS 221 Network Camera
0221-0xx
