Powering on and Image Setting
☐
Show device diagram
1. Open the lens cover (7). The lens cover can be secured to the strap using the built-in
magnet.
2. Press the ON/OFF (5)button briefly to turn on the device.
3. Adjust the eyepiece focus ring (1) of the device until the symbols on the display are
sharp.
4. Rotate the lens focus ring (6) to focus on the object being observed.
5. Enter the main menu with a long press of the MENU (3) button and select the desired
calibration mode: Manual (M), Semi-Automatic (SA) or Automatic (A).
6. Calibrate the image by briefly pressing the ON/OFF (5)button.If the SA or A calibration
mode has been selected the microbolometer is closed with an internal shutter
automatically. However, if the M calibration mode has been selected you must close the
lens cover before calibrating manually.
7. Select the desired observation mode (Forest, Identification, Rocks, User) by briefly
Summary of Contents for XQ LRF
