AXIOMTEK SBC8440, User Manual

Page: 36 / 86

SBC8440 3.5 Form Factor SBC User’s Manual
Display Drivers
2
,% ;:'
7 .$"? 97
2#)
Driver Installation
Step 1. Install Windows NT as you normally would do for a
VGA display. Run Windows NT Control Panel from the
Main Group. Choose the Display option. In the
Display Settings dialog box, click on Change Display
Type. Click on Change from the Adapter Type in the
Display Type dialog box. Click on Other in the Select
Device dialog box.
Step 2. Place the Windows NT Display Driver Diskette in drive
A. Press <ENTER> and the name of the driver, Chips
and Technologies Video Controller will appear
highlighted in the Models list box. Click on INSTALL to
install the selected driver. Once the installation is
complete, the system must be shut down and
restarted.
Step 3. Upon restart, at the Invalid Display Selection
message, click on OK and select the desired display
settings from the Display Settings dialog box. The
system must be shut down and restarted for the new
settings to take effect.