SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
Installation
13
3.4 Completing
Installation
To complete the installation, follow the steps listed below.
1.
Make sure the power is OFF.
2.
Set the configuration jumpers according to the jumper
settings on Chapter 2.
3. Install
the
SBC81613 Series
CPU card into one of the
slots on the passive backplane. You may allow the
SBC81613 Series
to stand alone as a single board
computer.
4.
Connect the I/O cables and peripherals, i.e. floppy disk,
hard disk, monitor, keyboard, power supply and etc. to the
CPU board.
NOTE:
The color of pin one is usually red or blue,
while others are gray.
5.
Turn ON the system power.
