SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
Jumpers and Connectors
6
2.2 Jumper
Settings
Making the proper jumper settings configures the
SBC81613
Series
to match the needs of your application. The following
summary table lists all onboard jumpers and their corresponding
functions and/or default settings.
Jumper Default
Setting
Jumper
Setting
JP1
TFT LCD Voltage Setting: 3.3V
2-3
JP2
COM 2 Mode Setting: RS232
3-5,4-6
JP3
COM 2 Mode Setting: RS232
3-5,4-6
JP4
Audio Out Mode Setting: Line Out
1-3,2-4
JP5
COM 2 Mode Setting: RS232
1-2
JP6
LVDS LCD Voltage Setting: 3.3V
2-3
JP7
Compact Flash Mode Setting: Master
1-2
JP8
Compact Flash Voltage Setting: 5V
2-3
JP9
Clear CMOS: Normal
1-2
JP10
Watch Dog Timer Trigger Type: Reset
2-3
JP11
Reserved 1-2
2.2.1 Power Selection of Flat Panel Connector:
JP1, JP6
VDDM Settings
5V Short
1-2
3.3V (default)
Short 2-3
1
2
3
SBC81613 Series
su3.3V or +5V. When using such
type of flat panels, configure jumper
JP1
and
JP6
to the
appropriate voltage of the flat panel connector.
The
JP1
set
LCD1 & LCD2
voltage supports and the
JP6
set
CN11
voltage supports.
SBC81613VEC, VECD does not support
