AXIOMTEK PICO316, User Manual

Page: 22 / 60

PICO316/317 Pico-ITX Board
16 Board and Pin Assignments
2.5.5 LVDS Connector (CN6)
It is a 2x20-pin (pitch=1mm) connector which is compliant with JST SM40B-SRDS-G-TF
for LVDS LCD interface. It is strongly recommended to connect it with matching
connector, SHDR-40VS-B. Pin 1~6 VCCM can be set to +3.3V or +5V by setting JP2
(see section 2.4.1).
Note
[*]
: When making LVDS cable, pin 2 of JST SHDR-40VS-B connector should
match pin 1 of CN6.
18-bit single channel
Pin Signal Pin Signal
1 VCCM 2 VCCM
3 VCCM 4 VCCM
5 VCCM 6 VCCM
7 N.C 8 N.C
9 GND 10 GND
11 N.C 12 N.C
13 N.C 14 N.C
15 GND 16 GND
17 N.C 18 N.C
19 N.C 20 N.C
21 GND 22 GND
23 Channel A D0- 24 N.C
25 Channel A D0+ 26 N.C
27 GND 28 GND
29 Channel A D1- 30 N.C
31 Channel A D1+ 32 N.C
33 GND 34 GND
35 Channel A D2- 36 Channel A CLK-
37 Channel A D2+ 38 Channel A CLK+
39 GND 40 GND