AXIOMTEK PANEL1127-671, Owner'S Manual

Page: 20 / 34

PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual
System Installation
12
3.1 CPU, HDD, DRAM and Riser Card
Installation
The standard PANEL1127-671 system already builds in a Pentium III
CPU, and a 3.5” hard disk drive. SBC83671, on the one hand, provide
one 168-pin DIMM socket that supports system memory up to 512MB.
When upgrading the CPU, HDD, DRAM, or Riser Card refer to the
following illustration and instructions:
1. Remove the 7 screws securing the riser card assembly’s back
cover. Take off the cover by sliding it outward and pulling it
upwards as pointed by the arrows for CPU, DRAM, & PCI/ISA
add-cards installation.
Note: To install the add-on cards, you have to remove the
audio and USB ports’ screws first.
2. Another 4 screws, needs to be removed for HDD installation or
Touch Screen control board maintained.