AXIOMTEK MMB501, User Manual

Page: 22 / 67

MMB501 LGA1151 ATX Motherboard
16 Board and Pin Assignments
2.4.4 VGA and DVI-D Connector (CN10)
CN10 is a double-deck connector comprising a lower connector for VGA port and the
upper connector for DVI-D port.
This is a high rise DVI-D connector provides transmission of fast and high quality video
signal between source device (graphic card) and display device (monitor).
The 15-pin D-Sub connector which is commonly used for VGA display. This VGA
interface configuration can be configured via software utility.
Pin Signal Pin Signal
1 TX2- 2 TX2+
3 Ground 4 NC
5 NC 6 DVI_SPD_CLK
7 DVI_SPD DATA 8 CRT-VSYNC
9 TX1- 10 TX1+
11 Ground 12 NC
13 NC 14 VGAVCC
15 Ground 16 FPDETECT
17 TX0- 18 TX0+
19 Ground 20 NC
21 NC 22 Ground
23 TXC+ 24 TXC-
Pin Signal Pin Signal
1 Red 2 Green
3 Blue 4 NC
5 GND 6 DETECT
7 GND 8 GND
9 VCC 10 GND
11 NC 12 DDC DATA
13 Horizontal Sync 14 Vertical Sync
15 DDC CLK