GOT321W-502-PCT
User’s Manual
10
Hardware and Installation
2.2 Jumper and Connector Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close the pins. And remove jumper clip from 2 jumper pins to open the pins.
Diagram 2-1 illustrates how to set up a jumper.
Diagram 2-1 Definitions of pin settings
Pins 1-2 open Pins 1-2 close Pins 1-2 close All pins open
Before applying power to GOT321W-502-PCT, please make sure all of the jumpers and
connectors are in default position as Diagram 2-1.
Diagram 2-2 Motherboard component position
