AXIOMTEK CAPA13S Series, User Manual

Page: 22 / 69

CAPA13S Capa Board
16 Board and Pin Assignments
2.5.6 M.2 2242/3042 Key B Connector (CN10)
The CN10 is a M.2 Key B connector. It is suggested to install the M.2 storage module via
SATA with 22mm width and 42mm length or the M.2 cellular module via USB 2.0 with
30mm width and 42mm length. It also supports the M.2 storage module via PCIe x2 by
BOM option with hardware change.
Pin Signal Pin Signal
1 CONFIG_3 2 +3.3V_SBY
3 GND 4 +3.3V_SBY
5 GND 6 Full Card PWR OFF
7 USB_0_DP0 8 W_DISABLE#
9 USB_0_DM0 10 NC
11 GND 12
Key B
13
Key B
14
15 16
17 18
19 20 NC
21 CONFIG_0 22 NC
23 1.8V) 24 NC
25 NC 26 NC
27 GND 28 NC
29 PCIE_RXN4 30 SIM_RST
31 PCIE_RXP4 32 SIM_CLK
33 GND 34 SIM_DATA
35 PCIE_TXN4 36 SIM_PWR
37 PCIE_TXP4 38 NC
39 GND 40 SMB_C1.8V)
41
SATA1_RXP/
PCIE_RXN5
42 SMB_DA1.8V)
43
SATA1_RXN/
PCIE_RXP5
44 NC
45 GND 46 NC
47
SATA1_TXN/
PCIE_TXN5
48 NC
49
SATA1_TXP/
PCIE_TXP5
50 PERST#
51 GND 52 CLK_REQ4
53 PCIE_CLKN4 54 PEWAKE#
55 PCIE_CLKP4 56 NC
57 GND 58 NC
59 NC 60 NC
61 NC 62 NC
63 NC 64 NC
65 NC 66 NC
67 1.8V) 68 SUSCLK
69 CONFIG_1 70 +3.3V_SBY
71 GND 72 +3.3V_SBY
73 GND 74 +3.3V_SBY
75 CONFIG_2