AXIOMATIC AX130511, User Manual

Page: 135 / 142

UMAX130511 Version 1.00A Preliminary Documentation
– May be subject to change
135 - 141
Subindex 1h
Description FD1 Clear Threshold
Access RW
PDO Mapping No
Value Range 500 to 5041h at subindex 1 [ºC x 10]
Default Value 850 (85.0ºC)
Subindex 2h
Description FD2 Clear Threshold
Access RW
PDO Mapping No
Value Range 5042h at subindex 3 to
5041h at subindex 2 [V x 10]
Default Value 480 (48.0V)
Subindex 3h
Description FD3 Clear Threshold
Access RW
PDO Mapping No
Value Range 5041h at subindex 3 to
5042h at subindex 2 [V x 10]
Default Value 120 (12.0V)
2.4.85. Object 5050h: FD Enable Error Check 3 Faults
This object enables or disables the fault detection error-checking feature for each fault detectable by the 2IN-
2OUT-SIG-CO. The bitmap for this object at sub-index 1 is:
•
Bit 0: Over Temperature Detection
•
Bit 1: Over Voltage Detection
•
Bit 2: Under Voltage Detection
Object Description
Index 5050h
Name FD Enable Error Checking 3 Faults
Object Type ARRAY
Data Type UNSIGNED8
Entry Description
Sub-index 0h
Description Number of entries
Access RO
PDO Mapping No
Value Range 1
Default Value 1
Sub-index 1h
Description Error Check for FD 1 to FD 3
Access RW
PDO Mapping No
Value Range Bit Value 0 = Error Check Disabled