FMS QS
Quick Setup Sheet
Full Metal Stand
Page 1: ...FMS QS Quick Setup Sheet Full Metal Stand ...
Page 2: ...llars and out the top to connect to the speaker later on Step 4 Now place the collars on top of the pillars but do not tighten the set screw At this time set screws should be facing the rear of the stand Speaker wire should be placed in one of the collar notches Step 5 Attach the platform to the top of the metal collars ensure that the metal lips of the plate face upward using the six supplied scr...
Page 3: ...abs between the platform set screws and the speaker then gently tighten the rear platform set screws to bring the speaker up against the metal tab at the front of the platform Do not over tighten these screws Step 10 Connect the speaker cable to the speaker binding posts Step 9 Step 10 Step 8 Step 7 Platform Set Screws Cable Platform Tabs FMS QS Quick Setup Sheet Visit www axiomaudio com manual_in...
Page 4: ...Axiom Audio Head Office 2885 Highway 60 Dwight ON Canada P0A 1H0 Toll Free North America 1 866 244 8796 Worldwide 1 705 635 3090 Email info axiomaudio com www axiomaudio com ...
