6
I/O AND CONTROL OPERATIONS
MAINS IN
Powercon® NAC3FCA power input connector (blue). To switch the amplifier on, insert the Powercon® connector and turn it clockwise
into the ON position. To switch the amplifier off, pull back the switch on the connector and turn it counter-clockwise into the POWER
OFF position.
MAINS OUT
Powercon® NAC3FCB power output connector (grey). This is connected in parallel with the MAINS ~ / IN, it is suited to link the
supply of a
maximum of further 3 AX800A NEO
loudspeakers.
WARNING! In the case of product failure or fuse replacement, disconnect the unit completely from the mains power.
The power cable must only be connected to a socket corresponding to the specifications indicated on the amplifier unit.
The power supply must be protected by a suitably rated thermo-magnetic breaker. Preferably use a suitable switch to
power on the whole audio system leaving the Powercon® always connected to each speaker, this simple trick extend
the life of the Powercon® connectors.
INPUT
Audio signal input with locking XLR connector. It has a fully electronically balanced circuitry including AD conversion for the best
S/N ratio and input headroom.
LINK
A direct connection from the input connector to link other speakers with same audio signal.
ON
This LED indicates power on status.
LINK
INPUT
ON
ST
ANDARD
LONG THROWDOWN FILL
SINGLE BOXUSER
TERMINATE
NETWORK
AX800A NEO
POWERED VERTICAL ARRAY ELEMENT
IN
OUT
SIGN/LIMIT
MANUFACTURED
by
PROEL S.p.A.
MAINS~ IN
POWER OUT
ON
LOCK
PUSH
OFF
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
CODE:
MAINS:
SUPPLY:
WEIGHT:
S/N:
100-240V~ 50-60 Hz
360 W
22.5 Kg
00001
AX800A NEO
MADE IN
ITALY
POWER OUT
MAINS: SAME AS INPUT
MAX OUT CURRENT: 15 A
(100-240V~ 50/60 Hz)
