USER MANUAL
AX6C
High Output Column Array
KEY FEATURES
• High Power passive portable Line Array element
• 6 x 3.5” neodymium transducers with waterproof cones
• Designed for mobile and installed applications
• Acoustic transmission line back loading design, resulting in clean mid-bass
• Fast, easy-to-use integrated suspension system
reproduction and natural cardioid behaviour
• Aluminium frame structure
• Wide horizontal dispersion through Front Diffraction Waveguide (FDW)
• Black or white finish
• Line Array dispersion characteristics
INTRODUCTION
The AX6C Line Array is a passive system equipped with six 3.5” neodymium transducers with waterproof cones, designed for
portable and permanently installed applications where high power and clarity are needed. The aluminum frame box structure
ensures lightweight and strength, while the shape features a back-loaded transmission line design that delivers clean mid-bass
reproduction and natural cardioid behaviour. A Front Diffraction Waveguide (FDW) delivers wide horizontal dispersion, making
the system flexible and adaptable to many different applications.
The AX6C line array module has been designed to be used as a stand-alone or multiple column system in fixed installations,
frontfill, or under balcony applications, and for low-profile stage monitoring solutions. It can also be combined with AX12C and
AX12LF columns in multiple column systems in different configurations.
The AX6C can be driven by the SW2100A processed active subwoofer or by QC Series Class D processed amplifiers. Up to eight
AX6C modules (or different combinations of AX6C and AX12C) can be driven by one channel of the SW2100A subwoofer or of
a QC amplifier. Different presets for different combinations are available for the built-in CORE DSP, which can be also remotely
controlled using PRONET AX software.
Thanks to the elegant mechanical design the AX6C can be easily transported, while the integrated suspension system makes its
deployment very fast and simple. Each unit comes with two aluminum brackets and four pins that allows multiple array elements
to be easily combined either together, with the AX12C, or with the matching SW2100A subwoofer, or also in combination with
the complete range of mounting hardware available, including flybar and several brackets and stands.
TECHNICAL SPECIFICATION
SYSTEM
INPUT CONNECTIONS
System’s Acoustic Principle
Line Array Element
Short Transmission
Line Back Loading
Front Diffraction Waveguide
Connector Type
Neutrik® Speakon® NL4 x 2
(1+/1- signal IN & LINK ; 2+/2- thru)
POWER HANDLING
Frequency Response (±3dB)
200 Hz - 16 KHz (Processed)
Continuous AES Pink Noise Power 180 W
Nominal Impedance
32 Ohm
Program Power
360 W
Minimum Impedance
25 Ohm
ENCLOSURE & CONSTRUCTION
Horizontal Coverage Angle
100° (-6 dB)
Width
107 mm (4.2")
Sensitivity (4V)
102 dB SPL @ 1m*
Height
626 mm (24.6") - without flying system
Maximum (peak) SPL
124 dB SPL @ 1m*
673 mm (26.5") - with flying system
TRANSDUCERS
Depth
193 mm (7.6")
Type
6 x 3.5" (88mm) Neodymium
magnet woofers, 1" (25mm) VC
Enclosure Material
Aluminum
Paint
High resistance, water based paint, black or
white finish
Cone
Waterproof Cone
Flying system
Aluminum Fast Link structure with dedicated pins
Voice Coil Type
Ventilated voice coil
Net Weight
6.6 kg / 13.8 lbs. (without flying system)
8.7 kg / 19.1 lbs. (with flying system)
*measured @4 m and scaled @1 m
rev01_2018-03
