Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
54
2021-08-01 | Technical improvements, changes in design, printing- and other errors reserved.
è
Click on UPLOAD.
The upload will take a few seconds.
The new license is listed in the ACTIVATED
LICENSES dialog.
è
Reboot the device and log in again.
The new function is only available after a restart of the
headend.
5.11. CAS Simulcrypt (with MKS 1-02)
The setup for the conditional access system requires the installation and configuration of a CAS server, which
generates ECMs and EMMs, among other things. Setting up a CAS server is not described in this document.
To configure the settings for the headend unit, you must have a corresponding licence (see 5.10 on page 53). If
this licence is activated in the headend, the necessary settings can be made under CAS.
è
Click on CAS SETTINGS.
Several fields and tables for the CAS settings are displayed.
5.11.1. Global Settings
Enable Simulcrypt
: Enable or disable Simulcrypt (license needed to activate).
Network interface
used for simulcrypt-related network traffic, option is Control (Configuration port).
The IP address of the port must be configured for EMMG (CAS server), see 5.3 on page 42.
EMMG Listening Port:
TCP port configured in EMMG (CAS server) to connect the headend.
