2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
17
2.7.2.
Connection via Ethernet over Coax to a router which is connected to the Internet
2.8.
Connecting to a CAS server (with MKS 1-02)
The headend can be connected to a CAS server. The connection can be established via the the Control
interface.
Requirements:
•
Access to an appropriately configured CAS server must be available.
It is not part of the headend, nor is it described in this document.
•
A valid license must be installed for the device (see 5.10 on page 60).
•
The headend must be configured accordingly (see 5.11 on page 62).
If the headend station is connected to the CAS server and configured correctly, it can encrypt programs. The
encrypted programs can be decrypted by connected users with the appropriate CA module/smart card.
