Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
8
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
1.7.
Graphical user interface
The settings can be changed via the user interface of the integrated web interface. To access the user interface
and thus configure the devices, you need a standard PC/laptop with a network interface and the actual version
of the installed web browser (left).
The configuration interface is "mobile ready" and can therefore also be used from the smartphone or tablet
(right).
1.8.
SMARTPortal
The AXING SMARTPortal connects each AXING headend device with a cloud-based portal and thus provides
worldwide access to the devices. The connection is password-saved and scrambled. The only requirement on
site is an internet connection of the device e. g. via LAN, EoC, 3G/LTE-Router (see 2.6 on page 16).
With AXING’s SMARTPortal a worldwide configuration of all settings or software updates can be ensured. On
customer request AXING can provide the necessary support.
In addition, the SMARTPortal also sends error messages to a configured e-mail address. This makes monitoring
the devices simple and safe. Error messages occur in the following cases, for example:
•
Power supply failure
•
Processor temperature > 90 °C
•
Airflow temperature > 50 °C (MK 8-00/-06, MK 16-00/-06, MK 8-20/-06 only)
•
Power supply temperature >85 °C
•
Failure of the input signal
•
CAM failure (MK 8-06, MK 16-06, MK 8-26, MK 8-03N und MK 12-03N only)
•
Modulator overflow
•
RF output-level not according to settings
