Operation instructions | ISW 9-43 | Set-Top Box
6
2019-04-30 | Technical improvements, changes in design, printing- and other errors expected.
3. Installation
Switch off all the devices (TV, amplifier, etc.) and take the power supply unit out of the socket before
connecting or disconnecting any cable.
3.1.
Power supply unit
The product should be used with power supply unit provided by the manufacturer only.
The power supply cord is to be put to prevent its deformation and jamming and touching it well.
The power supply cord is not to be laid under the carpets or blocked with anything where any damage may
not be noticed.
3.2.
Installation
Use a HDMI cable with length less than 3 m, to connect the ISW 9-43 to the TV set. Alternativly use a 3,5
mm Jack to 3 RCA cable to connect the ISW 9-43 to the analogue input of the TV set.
Connect the Ethernet port of the device to the IPTV data source (e.g. via a switch). Use 5/6 CLASS UTP
Ethernet Cables.
Connect the AC adapter to the 12V DC connector and plug the AC adapter into a power outlet.
Turn on the TV and switch to the input to which the ISW 9-43 is connected.
After a few seconds the application start screen appears.
Connecting with HDMI – best quality
Connecting with AUDIO/VIDEO Input
red = right channel
white = left channel
yellow = composite video
