Operation instructions | EOC 1-31 and EOC 231 | Ethernet over Coax Peer to Peer
Page 18 of 26
AXING-BA_EOC-1-2-31.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2022-08-16
5.5.1.
Further 2,4-GHz Virtuell Access Points
The EOC supports up to four Virtual Access Points (2.4G VAP 1 to 2.4G VAP 4). So a further three Virtual
Access Points can be configured.
For
2.4G VAP 2
,
2.4G VAP 3
, and
2.4G VAP 4
, select Enable in the Service box. The parameters of the
other VAPs appear.
Click Update to apply the entered values.
Important:
This does not yet activate the changes in the EOC. Only when you activate them on the
Active
Changes
page will the changes actually be applied to the device (see 5.8 on page 22).
