Operation instructions | CMO 1-01 | CMO 2-01
12
2020-12-17 | Technical improvements, changes in design, printing- and other errors reserved.
4.1.2 Software
This page shows the cable modem hardware and software version as the following table. All those information
are read only.
4.1.2.1
Internet access with a cable network operator
If Network Access shows “Allowed,” then your cable network operator has configured the CMO 2-01 to have
Internet connectivity. If Network Access shows otherwise, you may not have Internet access, and please
contact your cable network operator for assistance.
4.1.3 Security
This page allows the configuration of access privileges and offers the possibility to restore the factory settings
of the system.
In the
Password Change User ID
field, enter the user name for which you want to change the password
(for example, AXING_USER).
In the
New Password
field, enter the new password.
In the
Re-Enter New Password
field, enter the new password again.
In the
Current User ID Password
field, enter the previous password.
Then click Apply.
4.1.3.1
Restore factory settings
For
Restore Factory Defaults
, enable the
Yes
option.
Then click
Apply
.
The gateway configuration is reset to the factory defaults.
