background image

 

 

IMPORTANT SAFETY INSTRUCTIONS 

                   

 

GENERAL WARNINGS                                                                                                                                                                                                                                               

1.  When  you  pull  down  the  package  of  oven,  keep  packing  materials  such  as  plastic  bags, 

polystyrene, or nails out of the reach of children.   

2.  For avoiding fire and explosion, it is prohibited to put combustibles into oven, neither on it nor 

close to it. 

3.  Do not attempt to change this oven

’s characteristic, it may cause danger to you. 

4.  If other 

appliances’ cable are close to the oven, make sure those cable won’t stuck in the door 

or touch the hot surface of oven.   

5.  It is strictly prohibited to regard the oven as a storage cabinet when it is not in use. It will cause 

accidents or danger if oven is switched on accidently. 

6.  Be careful of the hot food items inside the oven once the cooking is done. 

7.  Do not allow children to go near the oven when it is hot, especially  when the grill  program is 

running. 

8.  Do  not  pull  the  oven  with  handle;  haul  upon  the  power  cable  to  remove  the  plug  from  the 

socket. 

9.  Do not touch the oven with wet or damp hands or feet. Ensure you are not barefoot. 

10.  It  is  generally  not  a  good  idea  to  use  adapters,  multiple  sockets  for  several  plugs  and  cable 

extension. 

11.  If the oven breaks down or develops a fault, switch it off at the mains and do not touch it. 

12.  If the cable is at all damaged it must be replaced promptly. When replacing the cable, follow 

these instructions: 

a) The cable must be able to bear the electrical current required by the oven. 

b) Cable replacement must be carried out by properly qualified technicians. 

c) The earthling cable (yellow-green) must be 10 mm longer than the power cable. 

13.  The door or the outer surface may get hot and temperature of accessible surfaces may be high 

when the appliance is operating. Care should be taken to avoid touching the outer surface and 

heating elements inside the oven. 

14.  Appliances  are  not  intended  to  be  operated  by  means  of  an  external  timer  or  separate 

remote-control system. 

15.  The appliance, as well as accessible parts becomes hot during use. Care should be taken to 

avoid touching heating elements inside the oven, children should be kept away. 

16.  This  appliance  is  not  intended  for  use  by  person  (including  children)  with  reduced  physical, 

sensory  or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been 

given proper supervision or instruction concerning use of the appliance by a person responsible 

for their safety. 

17.  Steam cleaner should not be used. 

18.  Never use abrasive or caustic cleaners, wire wool or sharp objects to clean glass oven door since 

it may damage to the surfaces,

 

enamel layer and ruin the oven

’s appearance by shattering the 

Summary of Contents for INTELLICA INT 70 TFT
























Reviews: