Axesstel PX320N, User Manual, Page: 9 / 27

6
CDMA FWP
PX320N
4.3 Make a Call
While your phone is power on and at standby screen, enter a destination number you wish to call and
then press <
Redial >Key. (Note: To modify digits you enter, you can press< CLEAR > Key to delete
wrong digits first and then enter new digits).
Or you can press <Contacts> key to enter contacts menu, <1 View> , < -> ,< OK > to select
the contacts list: <1 UIM Contacts> , <2 Phone Contacts> , or <3 Search Name> to search the
desired name, press <-> to scroll to the desired number then press < Redial >Key .Once the
call is connected, the phone’s screen will display the number you have dialed, and the time duration
the call has lasted.
The phone also has a speaker. To use the speaker to make a call, press < SPEAKER > Key, enter a
phone number, and press < Redial> Key.
4.4 Answer a Call
When there is an incoming call, the phone will ring and display the phone number of the incoming call
(if the number is available). You can pick up the handset or press <
SPEAKER> to answer the
incoming call. The ring tone and ring-tone volume can be changed in the setting menu.
Note: When the ri
ng volume is set to ’Slient’, the phone does not ring. Only the “Incoming call”
message blinks.
4.5 End a Call
You can end a call by pressing < POWER >. If you are using the handset for a phone call, hanging
up the handset will end the call automatically.