115
MENU | RDS/RBDS (NOT IN FALCON D7)
FALCON · User Manual · ENG
5.3.2
BASIC SETTINGS
5.3.2.1
UECP ADDRESSING
The recipient encoder, getting UECP data frames from remote devices, must be identifiable by a unique address:
Site (Zone) + Encoder ID. The remote devices will send UECP data frames to recipients through this addressing
data couple. For example, a UECP data frame could be sent to all RDS devices of the desired Site or to the same
Encoder ID of all Sites.
This section is used to set the individual device UECP address. In Individual Address set RDS site number and
encoder number.
Individual Address
Site(Zone): assign to your device the desired site number
Encoder: assign to your device a desired encoder ID number
Uecp Address
Here you can have all the Uecp Addresses list.
Site Addresses: the range of possible values is 1 to 1023
Encoder Addresses: the range of possible values is 1 to 63