112
MENU |RDS/RBDS (NOT IN FALCON D7)
FALCON · User Manual · ENG
RDS/RBDS
(NOT
IN
FALCON
D7)
In RDS/RBDS section you can set all the parameters from RadioText to AF, from EON to PTY/PTYN. You can also set
all Extended RDS/RBDS parameters.
In this section, you can setup all the parameters.
5.3.1
UECP PORTS (UNIVERSAL ENCODER COMMUNICATIONS PROTOCOL)
From this section, you can set communication parameters with available remote devices. These devices must be
able to send UECP packets from their serial ports
. Version UECP_7_05_100224 standard
.
5.3.1.1
SERIAL PORTS
Serial Port setup
To interface properly target's serial ports the right configuration must be set as described below:
Data: 8 bits, Stop bits: 1, Parity: None and Flow control: None.
Serial 1&2 Port Configuration
Speed: No action, 75 bps -115200 bps.
Communication Mode: Unidirectional, Bidirectional Spontaneous, Bidirectional Requested.
Timeout: No action, 1 min - 10 min, Inactive.