AWT PIM-P, User Manual, Page: 9 / 110

2-4
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
2.3 POWER REQUIREMENTS
The PIM-P Series is equipped with a switching power supply that provides automatic
operation from a 100 to 240 volt, 47 to 63 Hz, single-phase, AC power source. Maximum
power consumption is 750W / 750 VA
Caution
For bench-top use, choose a clear, uncluttered area. For field use, choose a
dust free environment. Ensure that there is at least 2" of clearance at the fan air
intake on right side vents of front panel, and the exhaust vents on the left side
vents of front panel to allow for proper air circulation.
Before powering the unit up make sure the instrument does not show
indications of exposure to extensive force like dents, torn off pieces or
loose parts in the case.
2.4 PIM-P SERIES PACKING LIST
PIM-P Series Analyzer is shipped complete and is ready to use upon receipt.
Note
Save the original packing material and container to reship the
instrument, if necessary. If the original materials (or suitable substitute)
are not available, contact AWT Co., Ltd. to purchase replacements.
Store the packing materials always in dry environment. If frequent used
in the field with we strongly recommend purchasing our PIM-P Transit
Case. See chapter Accessories for ordering information.
Unless otherwise ordered *, your will receive:
• PIM-P Series Passive Intermodulation Test System
• Line Cord with 90 degree connector
• 1 Connector Saver
• Low PIM Cable 1m (3.3ft)
• Low PIM Load 50W
• Install CD & manual
* PIM-P and accessories are available in customized versions / packages. Please refer to Appendix A
for specific package lists.