AWT PIM-P, User Manual, Page: 80 / 110

9-3
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
9.1 File
Start / Stop History Save 9.1.1
This feature allows users to log measurements over a period of time in Analyzer mode.
The log files are stored in TSV (Tab Separated Value) ASCII text format. Values listed are:
Date, Time, Carrier1 (MHz), Carrier2 (MHz), Output Level1 (dBm), Output Level2
(dBm), Offset (dB), ALC On/Off, Screen Mode, IM Number (Order), IM Frequency
(MHz), IM Measure(dBc), Direction, Measure Mode/Pass IM Level/decision.
Note : PIM-P does not support Offset, Measure Mode/Pass and IM Level/decision. This
are reserved for other test systems. The log data will show a hyphen “-“in these columns.
Direction is always reverse for PIM-P Analyzers.
Each log cycle requires manual start, entering a file name, and manual stop. File name
directory and drive can be chosen at liberty.