AWT PIM-P, User Manual, Page: 11 / 110

3-2
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
3.1 PIM-P FRONT PANEL
No. Element Description
A Touch Screen Display
Touch screen display 800x600. Never use sharp devices to push
buttons on the screen
B Type Label
Provides information about PIM-P Tx/Rx frequency bands
C Audio
Loudspeaker for audio signals
D
Main Power Switch PIM-P contains protection circuitry to control
RF Power during operation and during powering on/off cycles.
After switching Main Power Switch On wait 2 seconds before
pushing Front Power Button.
Fans may Briefly run after power off.
Note: Do not use Main Power Switch while system is in
operation mode, vital files may get corrupted
Always use the Front Power Button to power the system down.
E
Main Power supply AC Supply: 100-240V, 750W /750VA
use 90 degree connector only
Fuse: 4A /230V or 8A / 110V
F USB Ports (3)
USB Ports for mouse, keyboard and Memory Stick
G LAN connector
For factory use only