AwiDESULF combi-package for microbiological desulphurisation
Figure 23: Required space for AwiDESULF PureOxygen – Exemplary
representation
8.4
Mechanical Connection
When assembling the AwiDESULF, all components provided by Awite must be used as intended
(
). A flexible pipe must be laid from the valves to the addition points at the respective
fermenters.
– Material: flexible or solid plastic pipe 1”
– Pipe lengths of 100m and more are possible at the specified cross-sections (please inform
Awite in advance about the pipe lengths and the expected biogas volume flows so the right
compressor can be chosen)
– A connection with G1“ external thread is to be set up on-site at the point of supply
– At this connection a check valve (spring closed) is mounted (supplied by Awite). The mounting
direction must be taken into account.
– It is recommended to install a distribution device for the fed-in air or oxygen inside the
fermenter.
DANGER
In order to prevent a backflow of the gas into the air supply line and its environment, valves and/
or check valves are provided depending on the model. You must by all means connect these
components as intended.
54
