LR-2000KIT Quick Installation Guide
18300 Sutter Blvd., Morgan Hill, CA 95037
Quick Installation Guide
If you are new to the LR-2000, LR-2200 or LR
we suggest that you call AWID Technical Support at 408
The LR-2000KIT UHF Reader Test Kit is for planning, installing and testing the LR
readers, and their tags and cards. Keep the complete Kit, with this Guide, for quick access in your truck or shop.
It is your prime tool to build confidence in performance of the LR
Uses for the LR-2000KIT UHF Reader Test Kit
•
Demonstrate the LR-2000-EVAL reader (special
•
Test the planned location, to assure
•
Observe performance of a regular LR
•
Select the ideal location for mounting the vehicle tags, or holding the card
•
Prove that the vehicle tags operate well after they are mounted in
•
Substitute for the installed LR-2000/3000
Inside the Kit’s Case
•
“EVAL” Reader
– This is the 8 inch by 8 inch reader. It is a permanent part of this Kit. It has no data output.
It can not interface to your system. It is for demo and test only. The “EVAL” reader contains
•
LR-Sounder Test Unit
– This unit (about 3 inches by 4
reader. It beeps and changes LED color when the tag is read. It is perfect for demoing and testing an installation.
•
USB-to-DB9 Adapter
– It extends the serial adapte
•
DB9-to-Clips Adapter
– It connects a reader to a PC or controller
•
DC Power Unit
– It provides 12 volts DC to test an LR
•
Credentials
– 10 UHF tags and cards
HT-UHF Hangtag, VT-UHF Sunvisor Tag, WS
Metal-Mount Tag, RV-UHF Rearview Mirror Tag
•
Instructions
– This Quick Installation Guide, laminated for long life.
Recommended Accessories
Camera tripod, for temporary
Version 1.10
Applied Wireless Identifications Group, Inc.
18300 Sutter Blvd., Morgan Hill, CA 95037
•
Voice 1-408-825-1100
•
Fax 1-
Quick Installation Guide – LR-2000KIT UHF Reader Test Kit
2200 or LR-3000 reader, or if this is your first long
we suggest that you call AWID Technical Support at 408-825-1100.
2000KIT UHF Reader Test Kit is for planning, installing and testing the LR-2000, LR
readers, and their tags and cards. Keep the complete Kit, with this Guide, for quick access in your truck or shop.
It is your prime tool to build confidence in performance of the LR-2000/3000-family reader and its tags.
er Test Kit
reader (special unit included in the Kit) to your sales prospects and customers.
Test the planned location, to assure reliable operation of the long-range reader at the site.
LR-2000/3000-family reader, either in bench-testing or installed at the site.
Select the ideal location for mounting the vehicle tags, or holding the cards, inside or outside the vehicle
Prove that the vehicle tags operate well after they are mounted in or on the vehicles.
2000/3000-family reader in a service call.
This is the 8 inch by 8 inch reader. It is a permanent part of this Kit. It has no data output.
It can not interface to your system. It is for demo and test only. The “EVAL” reader contains
This unit (about 3 inches by 4-1/2 inches) alerts you to every read of the tag by the
reader. It beeps and changes LED color when the tag is read. It is perfect for demoing and testing an installation.
extends the serial adapter below to a USB port on your PC or controller.
It connects a reader to a PC or controller that has a 9-pin “D” serial port.
It provides 12 volts DC to test an LR-2000/3000-family reader, or to demo the “EVAL” reader.
cards: GR-UHF Graphics Card, CS-UHF Clamshell Card,
isor Tag, WS-UHF Windshield Tag (on a piece of windshield glass
UHF Rearview Mirror Tag, SV-UHF Sideview Mirror Tag, and PT
Quick Installation Guide, laminated for long life.
Camera tripod, for temporary reader support at 6 feet height (supplied by the user).
Page 1 of 2
Applied Wireless Identifications Group, Inc.
-408-782-7402
•
www.awid.com
2000KIT UHF Reader Test Kit
3000 reader, or if this is your first long-range installation,
1100.
2000, LR-2200 and LR-3000
readers, and their tags and cards. Keep the complete Kit, with this Guide, for quick access in your truck or shop.
family reader and its tags.
included in the Kit) to your sales prospects and customers.
range reader at the site.
testing or installed at the site.
, inside or outside the vehicles.
This is the 8 inch by 8 inch reader. It is a permanent part of this Kit. It has no data output.
It can not interface to your system. It is for demo and test only. The “EVAL” reader contains
no
LED or beeper.
1/2 inches) alerts you to every read of the tag by the
reader. It beeps and changes LED color when the tag is read. It is perfect for demoing and testing an installation.
r below to a USB port on your PC or controller.
(Black jacket.)
pin “D” serial port.
(Gray jacket.)
family reader, or to demo the “EVAL” reader.
UHF Clamshell Card, KT-UHF Keytag,
on a piece of windshield glass), MT-UHF
, and PT-UHF Portable Tag..
reader support at 6 feet height (supplied by the user).
