AWH TANKO JM100, Operating & Installation Instructions Manual, Page: 89 / 104

Jet Cleaner TANKO-JM
7 Maintenance Translation of the original Operating / Installation Instructions 2016/12 79/90
Remark: The items marked
“
X
”
or
“■”
are included in the wear parts package and can be ordered. The
items marked
“■”
are required for replacing wear parts [WP].
Item Qty. Designation Remark Article No. Material [WP]
01 1 Connection cover
BSP 1 ½ "
668 800 381 010 020 1.4404 (AISI 316L)
—
NPT 1 ½ " 668 800 481 010 020 1.4404 (AISI 316L)
02 1 Housing 668 800 000 020 020 1.4404 (AISI 316L)
—
03 1 Base of the housing 668 800 000 030 020 1.4404 (AISI 316L)
—
04 1
Collar bushing for inflow
disk
668 800 000 070 0K0 PTFE X
05 2 Sliding disk 34.4 x 26-2.4 668 800 000 140 0K0 PTFE X
06 1 Sliding disk 34.4 x 26-2.4 668 800 000 140 0N0 PEEK+PTFE X
07 1 Sliding disk 42.8 x 34-2.4 668 800 000 150 0K0 PTFE X
08 1 Sliding disk 42.8 x 34-2.4 668 800 000 150 0N0 PEEK+PTFE X
09 3 Sliding disk 42.8 x 34-4.6 668 800 000 160 0K0 PTFE X
10 1 Sliding disk 42.8 x 34-4.6 668 800 000 160 0N0 PEEK+PTFE X
11
—
Nozzle see Table 7.5-9 see Table 7.5-9 1.4404 (AISI 316L)
—
12 6 Jet concentrator 15.4 x 0.5-15.4 668 500 000 210 050 1.4571 (AISI 316Ti)
—
13 3 Nozzle extension 668 800 000 220 020 1.4404 (AISI 316L)
—
14
—
Inflow disk see Table 7.5-9 see Table 7.5-9 1.4404 (AISI 316L)
—
15 1 Rotor shaft 668 800 000 310 020 1.4404 (AISI 316L)
—
16
—
Rotor impeller see Table 7.5-9 see Table 7.5-9 1.4404 (AISI 316L)
—
17 1 Slide cap 668 800 000 340 020 1.4404 (AISI 316L)
—
18 1
Bevel gear wheel for
housing
668 800 000 400 020 1.4404 (AISI 316L)
—
19 1 Shaft-axle connection 668 800 000 410 L20 1.4404 (AISI 316L)
—
20 1 Axis for nozzle carrier 668 800 000 420 020 1.4404 (AISI 316L)
—
21 1
Bevel gear wheel for nozzle
carrier
668 800 000 430 020 1.4404 (AISI 316L)
—
22 1 Nozzle carrier, 3x 668 803 000 440 020 1.4404 (AISI 316L)
—
23 1 Spring ring DIN 127-B10 450212 1.4404 (AISI 316L)
■
24 1 Hex nut ISO 8673 M10 x 1 570022 1.4404 (AISI 316L)
■
25 2 Threaded pin ISO 4029 M4 x 5 ISK/RS 430178 1.4571 (AISI 316Ti)
■
—
—
Wear parts package Standard 668 830 0NG V00 000 X
Table 7.5-8: JM800 parts list (standard)