AWH TANKO JM100, Operating & Installation Instructions Manual, Page: 83 / 104

Jet Cleaner TANKO-JM
7 Maintenance Translation of the original Operating / Installation Instructions 2016/12 73/90
Remark: The items marked
“
X
”
or
“■”
are included in the wear parts package and can be ordered. The
items marked
“■”
are required for replacing wear parts [WP].
Item Qty. Designation Remark Article No. Material [WP]
01 1 Connection cover
BSP 3/4" 668 100 378 010 020 1.4404 (AISI 316L)
—
NPT 3/4" 668 100 478 010 020 1.4404 (AISI 316L)
02 1 Housing 668 100 000 020 020 1.4404 (AISI 316L)
—
03 1 Collar bushing for housing 668 100 000 060 0K0 PTFE X
04 4
Collar bushing for nozzle
carrier
668 100 000 080 0K0 PTFE X
05 1 Sliding disk 29.0 x 17.6-1.6 668 100 000 140 0N0 PEEK+PTFE X
06
—
Nozzle see Table 7.5-3 see Table 7.5-3 1.4404 (AISI 316L)
—
07 4 Jet concentrator 6.8 x 0.4- 6.8
668 100 000 210 020
668 100 000 210 050 1.4404 (AISI 316L)
1.4571 (AISI 316Ti)
—
—
08.1
—
Medium plug (bypass) see Table 7.5-3 see Table 7.5-3 1.4404 (AISI 316L) X
08.2
—
Motor plug see Table 7.5-3 see Table 7.5-3 1.4404 (AISI 316L)
—
09 1 Inflow disk 668 104 U00 300 820 1.4404 (AISI 316L)
—
10 1 Rotor shaft Hex SW28 668 100 000 310 020 1.4404 (AISI 316L)
—
11 1 Rotor star wheel 668 100 000 320 020 1.4404 (AISI 316L)
—
12 1
Bevel gear wheel for
housing
668 100 000 400 020 1.4404 (AISI 316L)
—
13 1 Axis for nozzle carrier 668 100 000 420 020 1.4404 (AISI 316L)
—
14 2
Bevel gear wheel with
nozzle carrier
668 102 000 430 020 1.4404 (AISI 316L)
—
15 1
Dowel pin acc. to
ISO 8748
0.062 x 0.25" 668 100 000 500 050 1.4301 (AISI 304) X
16 1 Round wire snap ring
similar to
DIN 7993
668 100 000 510 050 1.4571 (AISI 316Ti) X
17 4 Lock washer 20.62 / 0.812" 668 100 000 520 020 1.4401 (AISI 316)
■
18 2 Locking screw 668 100 000 530 020 1.4404 (AISI 316L)
—
— —
Wear parts package Standard 668 160 00G V00 000 X
Table 7.5-2: JM100 parts list (standard)