Jet Cleaner TANKO-JM
10/90
Translation of the original Operating / Installation Instructions 2016/12
2 Safety
–
The operating company must design the disconnection of the energy sources on the higher-level
plant technically in such a way that the Switch-off Procedure described in
section 7.2
can be
adhered to.
–
The operating company must define and adhere to the intervals for inspections and control
measures in accordance with the environment and media used.
–
The operating company must provide fire safety devices, e.g. the appropriate quantity of suitable
hand-held fire extinguishers of the appropriate size, in easily accessible places and provide
employees with training on fire safety.
–
Warnings in the documentation for externally supplied assembly units must be adhered to and
incorporated into the risk assessments for the specific workplace.
Connections:
Before operating the machine with the device, the operating company must make sure that the local
regulations are observed for assembly and installation and commissioning, if these tasks are performed
by the operating company.
2.4
Requirements for Personnel
The device must only be operated, maintained and repaired by persons with the appropriate
qualifications. These persons must be familiar with these instructions and act in accordance with them.
The respective authorizations for personnel must be clearly defined.
The following qualifications are designated in the instructions for various fields of activity:
Expert/Specialist Personnel
An expert is a person whose professional training, knowledge and experience and knowledge of the
relevant standards and regulations enables them to carry out work on the device and identify and
prevent potential risks independently.
Instructed Person
An instructed person has been briefed and, if necessary, trained by the operating company or an expert
in a briefing on the assigned tasks and possible hazards in the event of improper actions, and
instructed on the necessary safety devices and protective measures.
Only personnel with the following expertise are permitted to perform work on the device:
–
Assembly/disassembly: Industrial mechanic or similar training, practical experience in the
assembly/disassembly of devices
The person must be familiar with the construction, mechanical installation, maintenance of the
device and fault clearance on the device and have the following qualifications:
–
Vocational training and final qualification in the field of mechanics (e.g. mechanic or
mechatronics technician)
–
Welding work: Welder qualification in pipeline engineering or similar qualification.
–
Electrical work: Electrician; person with appropriate specialized training, knowledge and experience,
enabling them to identify and prevent risks which may be caused by electricity