TANKO®-CP Jet Cleaner
3 Construction and Function Translation of the original operating/installation instructions 2016/10
21/77
The specified values for consumption and rotation speed are average values, and may deviate by
approx. ±10 % during normal operation.
They apply to operation with clean water as the cleaning fluid at a temperature of +25 °C / +77 °F. The
values may differ if a different cleaning fluid and a different medium temperature are used.
The consumption of cleaning fluid by the TANKO-CP depends on the pressure of the cleaning fluid and
the size of the plug in the inflow disk which regulates the speed.
Installing a plug with a smaller hole leads to lower consumption.
3.4
Cleaning Agents
Due to the wide variety of practical cases of application and use for the cleaning device, it is NOT
possible for AWH to recommend specific cleaning agents for the operating company.
The operating company holds sole responsibility for the type of cleaning media, their use and handling.
For this reason, AWH can provide the owner with a few reference points and notes, but only as a
precautionary measure (for a device in a container), which must be observed and integrated into the
owner's risk assessments.
DANGER
Risk of explosion as a result of the formation of an explosive atmosphere!
There is a risk of death or severe physical injuries.
The following items are PROHIBITED for use as cleaning agents:
–
Fluids which may form a dangerous explosive atmosphere when splashed or
sprayed.
–
Fluids which cause a chemical reaction with the substance to be cleaned that could
form a dangerous explosive atmosphere.
–
Aggressive, flammable or explosive fluids
(e.g. acids, thinners, etc.).
WARNING
Warning of corrosive and aggressive cleaning agent!
There is a risk of death or severe physical injuries.
Adhere to the regulations and specifications in the safety data sheets for the cleaning
agents (e.g. vapors or hazardous substances).
Summary of Contents for TANKO CP Series
Page 84: ......