TANKO®-CP Jet Cleaner
18/77
Translation of the original operating/installation instructions 2016/10
3 Construction and Function
3.3
Technical data
The estimated safe service life of the device is 10 years with single-shift operation and the use of
drinking water.
Prerequisite for this: the device must be maintained properly at the intervals specified
in the
section 7.4 Maintenance
, and the wear parts must be replaced regularly.
Aggressive agents can reduce the service life of the device.
3.3.1
Operating temperature TANKO-CP2/CP2S and TANKO-CP3
Designation
TANKO-CP2
TANKO-CP2S
TANKO-CP3
Effective cleaning radius
2 m
3 m
Operating temperature
(permitted):
–
Cleaning agent
max. +95°C / +203°F
Sterilisation temperature
(permitted):
max. +121°C / +249°F
Ambient temperature
(permitted):
–
Inside the container
–
Outside the container
max. +140°C (max. +284°F)
NOTE
Risk of frost! -20°C – +40°C (-4°F – +104°F)
Operating pressure:
–
Cleaning agent
3 – 12 bar / 44 – 174 psi
Optimum pressure range:
–
Cleaning agent
5 – 8 bar / 73 – 116 psi
Flow rate:
–
360°
Thread
Clip-on
–
180° top Thread
Clip-on
–
180° bottom Thread
Clip-on
≈52.0 – 96.7 l/min
(3.1 – 5.8 m³/h)
≈58.3 –108.3 l/min
(3.5 – 6.5 m³/h)
≈41.7 – 78.3 l/min
(2.5 – 4.7 m³/h)
≈52.0 96.7 l/min
(3.1 – 5.8 m³/h)
≈41.7 – 80.0 l/min
(2.5 – 4.8 m³/h)
≈52.0 98.3 l/min
(3.1 – 5.9 m³/h)
≈41.7 – 80.0 l/min
(2.5 – 4.8 m³/h)
≈53.3 -101.7 l/min
(3.2 – 6.1 m³/h)
≈40.0 – 75.0 l/min
(2.4 – 4.5 m³/h)
≈50.0 96.7 l/min
(3.0 – 5.8 m³/h)
≈38.3 – 73.3 l/min
(2.3 – 4.4 m³/h)
≈50.0 93.3 l/min
(3.0 – 5.6 m³/h)
≈115.0 – 211.7 l/min
(6.9 – 12.7 m³/h)
≈103.3 – 190.0 l/min
(6.2 – 11.4 m³/h)
≈103.3 – 190.0 l/min
(6.2 – 11.4 m³/h)
Installation opening min.:
–
BSP/NPT connection
–
Clip-on connection
Ø 50 mm
Ø 50 mm
Ø 48 mm
Ø 48 mm
Ø 72 mm
Media connection [MC]:
3/4” BSP / NPT /
clip-on for pipe outer Ø 25.4 mm
1 1/2” BSP / NPT
Summary of Contents for TANKO CP Series
Page 84: ......