Additional Information
PLEASE READ THIS BEFORE CONTACTING US!
Male XLR Output -
The XLR chassis plug
provided will mate with any standard microphone
cable wired for ‘balanced’ signals. The signal
available is an un-balanced signal, but is equal in
quality to that of a balanced line. It is identical to
to that appearing on the JACK output, tip
connection - so there is no difference or benefit to
using one output over the other, except that of
convenience.
XLR Output Pin Connections -
The signal appearing in PIN 2 is IN PHASE with the signal appearing on
the TIP contact of the JACK output.
Note to our American customers:
The JD10 you have just bought is an updated version of the JD10 formerly available under the
MORLEY
brand. The differences are: New distortion circuitry, a balanced volume level between Classic & Rock gain
settings, silent FET switching, a male XLR output connector and new artwork to the facia.
Stewart Ward
AP10/GG10/JD10 Designer.
This manual applies only to: JD10 MK2.3 - PCB Issue: 07011H - 18/11/2004 or later.
The British Boutique Pedal
The British Boutique Pedal
The British Boutique Pedal
The British Boutique Pedal
The British Boutique Pedal
The British Boutique Pedal
Operating Instructions
JD10
JD10
MK2.3
MK2.3
Direct Recording PreAmp
Direct Recording PreAmp
TThhee BBrriittiisshh BBoouuttiiqquuee PPeeddaall
PIN 2 - Hot/Signal
PIN 3 - Ground
PIN 1 - Ground
Hand assembled in England By:
Award-Session, 34 Belvedere, Basingstoke, Hampshire, RG24 8GB, UK
Tel. +44 (0)1256 477 222 - Email. [email protected]
Website: www.award-session.com
