System Setup
-9-
STEREO:
The audio out format is stereo even if the original sound is 5.1CH
format.
3D SURROUND:
The audio out is virtual surround sounds (only for 5.1CH
player)
5.1CH:
Turn off DOWNMIX function. If playing 5.1CH discs or the unit is
connected with 5.1 channel amplifier, this item should be selected.(only for
5.1CH player)
DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT:
SPDIF OFF:
No digital output(coaxial off), only analog audio output.
ALL:
If this item is selected, you can set up RAW.
PCM ONLY:
In SPDIF/PCM mode, setup PCM channel according to your
preference.
LPCM OUT :
Select PCM frequency at 48kHz or 96kHz.
Note:
Some amplifiers don't support 96kHz sampling which will effect the
coaxial output.
FRONT, CENTER, REAR and SUB-WOOFER SPEAKER: (No this item in
2CH player)
If your speaker system includes the above speakers, you can set these
items according the real speaker status.
DIALOG:
The DIALOG mode is available, and you can press up and down
direction key to adjust it. (In the DOWNMIX mode, LT/RT or STEREO is
selected.)
D.R.C
: The D.R.C can control data record. You can chose AUTO, ON and
OFF in this mode.
DUAL MONO:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the mix-mono channel.
DYNAMIC:
Select this to reduce the overall volume and still keep defined audio sound.
You can press up and down direction key to adjust it.
DOLBY DIGITAL SETUP
DA641-P9.CDR
