6. UPnP
7. NAT
• WAN
1. Set the network of the DVR. Go to Start
→
Settings
→
Network
→
PPPoE. Input static IP address or enable PPPoE and input the
username and password received from your ISP
2. Go to Start
→
Settings
→
Camera. Click “Add Camera” or
behind the column of the search camera and select “Manually Add”
to add the IP cameras. Input IP address, server port, username and
password of the IP camera. The IP camera must be connected over
WAN. And here the IP address of the IP camera must be a WAN
IP address.
• NAT Setting
You can use the UPnP function to enable the fast connection of the
device to WAN via a router without port mapping.
1. Go to Start
→
Settings
→
Network
→
UPnP, and enable UPnP
and then click “Apply” button to save.
2. Enable the UPnP function in the router.
3. Click “Refresh” button to refresh the UPnP status. If the UPnP
status were still “Invalid UPnP” after refreshing it for several times,
the port would be wrong. Please change the mapping type to
“Manual” and then click to modify the port until the UPnP
status turns to “valid UPnP”.
1. The DVR shall be powered on and connected to the network.
2. Go to Start
→
Settings
→
Network
→
TCP/IP. You can obtain
the IP address, subnet mask and gateway automatically.
You can also manually enter them according to the actual network
situation. Please make sure the network segment is the same as
that of the network which is used.
3. Set the preferred or alternative DNS Server. Click “Apply” to
save the parameters.
4. Go to Start
→
Settings
→
Network
→
NAT tab. Enable NAT and
select the NAT Server Address (The default NAT Server Address
is
nat.autonat.com
). Click “Apply” to save the parameters.
9. Manual Recording
Enter Password
Enter Username
Enter device serial number
Login
• NAT Access
After finishing the NAT settings, you can input
www.autonat.com
in
the IE address bar and then press enter to go to the following
interface. If you are the first time to access the NAT, you shall
download and install the ActiveX according to the popup tips.
After installing ActiveX successfully, it will pop the login box.
Device Serial Number:
Click on the menu bar at the bottom of
the live interface to check the serial number or go to Start
→
Settings
→
Network
→
Network Status to check the serial number of the DVR).
Username:
The username of the DVR. The default username is
admin.
Password:
The password of the DVR. The password is set by yourself
when you configure the wizard for the first time.
Before recording, please install and format a HDD. In the live
interface you can see the menu toolbar. Click button to start
recording. Click it again to stop recording. You can also click to
check the status of the recording.
10. Playback
Click “Instant Playback” in the right-click menu of the camera’s
preview window to select or drag the playback progress bar
to change the playback time to play back the record.
Click on the tool bar at the bottom of the live preview
interface or click Start
→
Playback to go to the playback interface
as shown below. You can also add the playback cameras manually.
Click in the playback window to pop up the “Add Camera”
window. Check the cameras in the window and then click “Add”
to add playback camera. The record files of the added playback
camera will be played in the playback interface.
• Instant Playback
• General Playback
5. Checkmark the device you want to add and then click “Add” button.
The DVR will automatically refresh the cameras and return to
“Edit Camera” interface. “Online” status means connecting
the device successfully and you will see the live image. You may
select the added device and click button to modify channel,
IP address, etc.
UPnP
Enable
Map Type
Auto
Port Type
External Port
External Address
Port
UPnP Status
Edit
HTTP Port
80
183.17.254.19
80
Valid UPnP
HTTPS Port
443
183.17.254.19
443
Valid UPnP
Server Port
6036
183.17.254.19
6036
Valid UPnP
RTSP Port
554
183.17.254.19
554
Invalid UPnP
Refresh
Apply
Apply
NAT
Visit Address
www.autonat.com
Enable
NAT Server Address
nat.autonat.com
Display Password
Camera Name
Address
Sync to IPC
Model
Edit Camera
XXX
192
.
168
.
1
. 58
80
admin
XXX
Port
Username
Protocol
Password
IP Camera 1
OK
Test
Cancel
Upgrade
Operation
Version
No.
Camera Name
Address
Port
Protocol
Model
Preview
Status
Edit Camera
Edit Camera Group
Camera Signal
Search Camera
1
2
3
4
5
192.168.1.45
IP Camera 1
[A01]Camera1
[A02]Camera2
[A03]Camera3
[A04]Camera4
XXX
3.4.2
Online
XXX
80