AVYCON AVR HT Series, Manual, Page: 81 / 135

9.3.2 Exception
Alarm Management
73
Exception Configuration:
①
Click Start

Settings

Camera

Intelligent Detection

Exception to go to
the following interface.
Exception Alarm Handling Configuration:
①
Click Start  Settings  Alarm  Intelligence Alarm  Exception to go to the
interface.
②
③
Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”,
“Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of exception
detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for
details).
Click “Apply” to save the settings. You can click “Exception Config” to go
to the exception detection configuration interface.
②
Select the camera and enable the relevant detection as needed.
③
④
⑤
Set the sensitivity of the exception detection.
Click “Apply” to save the settings.
Click “Processing Mode” to go to the alarm handling configuration
interface of exception detection.
Scene Change : Alarms will be triggered if the scene of the monitor video has
changed.
Video Blurred : Alarms will be triggered if the video becomes blurry.
Video Color Cast : Alarms will be triggered if the video becomes obscured.