Tips:
Please skip Step
⑦
and
⑧
if the DVR do not support RAID function.
Manual
:
Set the “Sensor Record”, “Motion Record” and “Schedule Record” of
each camera. Click “Next” to save the settings. See 7.1.1 Mode Configuration
for
details.
Wizard & Main Interface
17
⑦
⑧
⑨
Disk Mode.
Click “Enable RAID” to enable the RAID function. Click “Next” to
continue.
Create an array.
Set the array name and select array type which including
RAID0, RAID1, RAID5, RAID6 and RAID10. The global hot spares and array
capacity can also be viewed here. See 7.4 Disk
for details. Click “Next” to
continue.
Record Settings.
Two record modes are available: auto and manual.
Auto
:
Select one auto mode in the interface as shown below and then click “OK”
button to save the settings. See
7.1.1 Mode Configuration
for details.
Summary of Contents for AVR HT Series
Page 1: ...AVR HT NT Series MANUAL Digital Video Recorder ...
Page 128: ...Fig 9 2 FAQ 120 ...