manualshive.com logo in svg

AVYCON AVR HT Series, Manual, Page: 116 / 135

Share
Download
AVYCON AVR HT Series Manual Download Page 116

12    Remote Surveillance

108

12.1  Mobile Client Surveillance

①

②

③

④

Click Start

Settings

Alarm

Sensor Alarm to go to the following

interface.

Download  and  install  the  mobile  client  “SuperLive  Plus”  into  the  mobile 

device with the Android or iOS system.

Run the mobile client, go to the “Add Device” interface and then click       to 

scan the QRCode of the DVR (Go to Start

Settings

System

Information

Basic to view the QRCode of the DVR).

After scanning the QRCode successfully, enter the login password to log in 

mobile client.

12.2  Web LAN Access

①

②

Click Start

Settings

Network

TCP/IP to go to the “TCP/IP” interface. 

Set the IP address, subnet mask, gateway, preferred DNS and alternate DNS of 

the DVR.

Open a web browser on your computer, enter the IP address of the DVR in 

the address bar and then press enter to go to the login interface as shown 

below. You can change the display language on the top right corner of the login 

interface. Enter the username and password of the DVR in the interface and then 

click “Login” to go to the live view interface.

Summary of Contents for AVR HT Series








































































































































Reviews:

No comments