AVYCON AVR HT Series Manual Download Page 106

Page: 106 / 135

You can scan the QRCode through mobile client which is installed in the mobile

phone or tablet PC to log in the mobile client instantly.

Access Type: NAT1.0 or NAT2.0 can be selected.

Note: if you want to use cloud upgrade, you must enable NAT2.0.

Device Management

11.1.8 802.1X

If it is enabled, the DVR data can be protected. When the DVR is connected to

the network protected by the IEEE 802.1X, user authentication is needed.

To use this function, the DVR shall be connected to a switch supporting 802.1x

protocol. The switch can be considered as an authentication system to identify

the device in a local network.

If the DVR connected to the network interface of the switch has passed the

authentication of the switch, it can be accessed via the local network.

Protocol type and EAPOL version: Please use the default settings.

User name and password: The user name and password must be the same with

the user name and password applied for and registered in the authentication

server.

Summary of Contents for AVR HT Series








































































































































Search results

Summary of Contents for AVR HT Series

Reviews:

AVYCON AVR HT Series, Manual, Page: 106 / 135

Search results

Summary of Contents for AVR HT Series

Reviews: