manualshive.com logo in svg

Avtech AVR-3HF-B, Instructions Manual, Page: 4 / 44

Share
Download
Avtech AVR-3HF-B Instructions Manual Download Page 4

ALL PROGRAMMING COMMANDS.....................................................................................27

MECHANICAL INFORMATION......................................................................................29

TOP COVER REMOVAL.......................................................................................................29
RACK MOUNTING................................................................................................................29
ELECTROMAGNETIC INTERFERENCE..............................................................................29

MAINTENANCE..............................................................................................................30

REGULAR MAINTENANCE..................................................................................................30
CLEANING............................................................................................................................ 30
TRIGGER DAMAGE..............................................................................................................30

WIRING DIAGRAMS.......................................................................................................31

WIRING OF AC POWER (STANDARD UNITS)....................................................................31
WIRING OF AC POWER (UNITS WITH -XP2 OPTION).......................................................32
WIRING OF DC POWER.......................................................................................................33
PCB 158R4 - LOW VOLTAGE POWER SUPPLY................................................................34
PCB 197H - HIGH VOLTAGE DC POWER SUPPLY & DISCHARGE..................................35
PCB 183A-S AND 183A-P CAPACITOR BANKS.................................................................36
PCB 156D - POLARITY CONTROL BOARD (-PN UNITS ONLY)........................................37
PCB 104F - KEYPAD / DISPLAY BOARD, 1/3.....................................................................38
PCB 104F - KEYPAD / DISPLAY BOARD, 2/3.....................................................................39
PCB 104F - KEYPAD / DISPLAY BOARD, 3/3.....................................................................40
MAIN WIRING (STANDARD -P UNITS)................................................................................41
MAIN WIRING (STANDARD -PN UNITS).............................................................................42
MAIN WIRING (-N UNITS WITH -XP2 OPTION)...................................................................43

PERFORMANCE CHECK SHEET.................................................................................44

 

Manual Reference: /fileserver2/officefiles/instructword/avr-3/AVR-3HF-B,ed13.odt.
Last modified May 7, 2020.
Copyright © 2020 Avtech Electrosystems Ltd, All Rights Reserved.

4

Summary of Contents for AVR-3HF-B













































Reviews:

No comments