background image

 

 

MPEG4 Licensing 

THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE 
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN 
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING 
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND 
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY 
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY 
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL 
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE 
HTTP://WWW.MPEGLA.COM. 

GPL Licensing 

 

This product contains codes which are developed by Third-Party-Companies and which 

are subject to the GNU General Public License (“GPL”) or the GNU Lesser Public License
(“LGPL”). 

The GPL Code used in this product is released without warranty and is subject to the 

copyright of the corresponding author. 

Further source codes which are subject to the GPL-licenses are available upon request. 
We are pleased to provide our modifications to the Linux Kernel, as well as a few new 

commands, and some tools to get you into the code. The codes are provided on the FTP 
site, and please download them from the following site or you can refer to your distributor:

http://download.dvrtw.com.tw/GPL/IPCAM/F-Seriers/linux.tar.gz 

 

Summary of Contents for AVN806 Series

























Reviews: