Phone: 1-803.358.3600 • Fax: 1-803.358.3636
100 Innovation Place • Lexington SC 29072 USA
avtecinc.com
•
new endpoint).
The
Endpoint Editor
dialog box displays.
3. Configure the endpoint's settings as appropriate. Verify that the
Endpoint Profile
that you assign to this endpoint
is consistent with the way you want the endpoint to operate.
IMPORTANT
This endpoint is considered a "media workstation endpoint" and not a "VPGate endpoint" because the
interface is directly connected to the console through a USB cable, and not through a VPGate. The
Name
you assign to this endpoint should be unique from other VPGate endpoints that are on the same domain.
Creating a Line Pad for an E911 Deskset Endpoint
1. In Scout Manager, on the
Configuration
tab, select the
Screens
folder.
2. Double-click the screen where you want to place the line pad for the NENA deskset device.
The screen editor displays in the workspace.
3. Drag the line pad from the
Toolbox
tab onto the screen.
4. Select the line pad and configure control-level property settings in the Line Pad Properties pane as necessary.
8
NENA/Deskset for Hardware Media Workstation
| November 2020 | Revision 8
