Mako Technical Manual
V2.1.0
17
Specifications
Specifications
Mako G-032B/C
Caution
Before operating any AVT camera, read the
safety instructions
and
ESD warnings
in the
AVT GigE Installation Guide.
Caution
Due to the small packaging and high speed of Mako cameras,
take care to ensure that the
housing temperature of the cam-
era does not exceed 45 °C
. The following are general guide-
lines for heat dissipation:
•
Mount the camera on a heat sink such as a metal bracket.
•
Lenses, when attached to a camera, act as a heat-sink and
help reduce housing temperature.
•
Ensure sufficient air flow. Use a fan if necessary.
Note
All measurements were done without protection glass /
without filter.
The uncertainty in measurement of the quantum efficiency
values is
10%.
This is due to:
•
Manufacturing tolerance of the sensor.
•
Uncertainties in the measuring apparatus itself
(Ulbricht sphere, optometer, etc.).
Feature
Specification
Resolution
658 x 492
Sensor
SONY IT CCD ICX424AL/AQ with HAD microlens
Type
CCD Progressive
Sensor size
Type 1/3
Cell size
7.4 μm
Lens mount
C / CS-Mount
Max frame rate at full resolution 102 fps
Max image bit depth
12 bit
On-board FIFO
64 MByte, up to 202 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize
= 8192 bytes per packet
Mono formats
Mono8, Mono12Packed, Mono12
Table 3: Mako G-032B/C camera specifications