AVT MAGIC TBR, Hardware And Software Manual

Page: 30 / 67

THE WEB INTERFACE OF MAGIC TBR
30
3.1.8 SNMP settings
For remote monitoring the system can be integrated into a Network Management
System (NMS).
The necessary MIB files can be downloaded via the SNMP download link directly
from the system.
Up to four NMS can be addressed.
To use the function, activate the checkbox
SNMP Enabled
first.
SNMP Parameters
Under
SNMP Parameters
select the desired version
V1
or
V2C
which is supported
by the NMS first.
Please ask your IT Administrator for the correct READ , TRAP and WRITE Community
parameters as well as the SNMP Port (default: 161).
Under System Description , Contact and System Location you can send informative
details about the installed system to the NMS.
To initialise the NMS, it is recommended to Send All Traps At Startup as well After
Enabling .
To minimise the number of alarms at the NMS site the system offers a classification
of all available alarms (see Traps ) with up to four categories A … D (e.g. Important,
Not Important, Informative etc.).
For each category you can enter an
Alias to make it clearer for the users.
Figure 17: SNMP Parameters