14
3.2
Ethernet interfaces Dante
The Ethernet interfaces P and S on the Dante module are used to connect the
device to a Dante network.
Pin assignment: Ethernet Interfaces Dante
Socket: RJ-45
Pin
Signal
Electrical characteristics
1
RX/TX A P
Pair A +
Recommendation: IEEE 802.3/Ethernet
Data rate (Auto neg.): 100/1000 Mbit/s
Recommended cable: CAT5 or higher
Max. cable length: 100m
2
RX/TX A N
Pair A -
3
RX/TX B P
Pair B +
4
RX/TX C N
Pair C +
5
RX/TX C P
Pair C
–
6
RX/TX B N
Pair B -
7
RX/TX D P
Pair D +
8
RX/TX D N
Pair D -
