Avson 370-185, Installation And Operation Manual

Page: 4 / 9

B
C
Flip the car body, insert the rear axle into the
car body, put the axle sleeve and gasket, put
the drive wheel on the left side, put the
ordinary wheel on the right side, put the
gasket on, lock with the opening pin, cover
the wheel cover.The front wheel operates the
same way.(10×18×1 Shim *8 & 2.5X3 Cotter
pin*4)
Open the seat, connect the cable speed
on the battery box, open the battery
box, add the dry battery, and close the
seat. (3×1.5V#7dry cell)
Insert the steering wheel into the steering
lever, screw it tight.(M5 Nut *1 & 5x38
Screw *1)
4.lnstall steering wheel
Put the steering lever with a shim to
through the car's body.(10x20x2 Shim *1)
3.Install steering lever
2.Install the wheel
7.line connection
C
G
Put the tipping bucket on the tail of
the car and screw it.(M5 Nut *2 &
5x40 Screw *2)
5.lnstall the tipping bucket
Put the spade into the slot on the side of
the car.
6.Install a spade
EN