33
Front Panel Control - Audio
Once in “Matrix” mode for audio, the extracted audio routing on the AC-AXION-8 can be controlled from the
front panel.
To Control:
1.
Navigate to the Audio Menu.
2.
Use the arrow key to highlight “Audio Mode” and press OK to select. The field will turn red.
3.
Use up/down arrow keys to change to “Matrix”.
4. Press the OK button again to set.
5. With the Audio Mode set to Matrix, you can use the INPUT/OUTPUT Buttons to route the audio.
Press OUTPUT number first, then the INPUT number next.
Front Panel Control - Network
This menu displays the current Network information. You can edit the following Network settings from the
front panel.
•
RIP
•
HIP
• MASK
•
TCP/IP
•
DHCP
NOTE:
The MAC Address is only viewable, you can not edit.
1.
Use the up/down arrow keys to highlight the setting you would like changed and press OK to select.
The field will turn green.
2.
Use up/down/left/right arrow keys to change the value.
3. Press the OK button again to set.
To change a setting:
Summary of Contents for AC-MX-88X
